Window Star

Window Star

25 Days of Paper 2015, Day 2
This post may contain affiliate links which means I make a small commission if you make a purchase at no additional cost to you.

Please note that the star in this photo is slightly different than the one you'll be making. Can you see why?

Please note that the star in this photo is slightly different than the one you’ll be making. Can you see the difference?


Hooray! It is time to make our first 25 Days of Paper project, the Window Star. Find the 6″ x 6″ piece of colorful kite paper in your paper pack – it’s a colored waxed paper that is used traditionally in the Netherlands for making kites. I ordered this paper from Imagination Childhood. It comes in packs of 100 sheets featuring ten assorted colors, and you can also order larger sheets.
Papers:
I recommend two types of paper for this project:
Kite Paper, a high quality wax paper that comes in packages of assorted colors. Fun!
Patty Paper (that white wax paper that separates burgers) which comes in white only, but is square and an inexpensive alternative to origami paper.
For this project you will need:

  • One sheet of 6″ x 6″ kite paper
  • Glue stick
  • Optional: Cutting mat, straight edge & craft knife
  • Optional: Bone folder

IMG_3492
Step 1: Prepare Paper: Cut the square of kite paper into eight rectangular pieces measuring approximately 3″ x 1-1/2″ (the kite paper is a bit larger than 6″; basically you cut it in half and then cut the two halves into quarters). I like to use a knife for cutting, but you can simply fold the paper and cut along the fold lines with scissors if you prefer.
IMG_3494
Step 2:  Fold and Glue: Do the following to all eight pieces of paper: First (as pictured above) fold the sheet in half lengthwise. Unfold, and then fold all four corners into the center line, creasing the folds with a fingernail or bone folder. Fold the top two corners in once more. If desired, use a glue stick to tack down all of the folded pieces so that each unit lies flat.
IMG_3496
Step 3: Assemble: Take two sections and place one of the wider points on top of the other. With the point tips touching, align the edge of the top section with the center line of the bottom section, as shown. Now apply a dab of glue to attach the two sections.
IMG_3499
Step Four: Finishing: Continue joining section by section in the same manner. When you get to the last section, attach it to the one before it just like you did the others. Then, tuck that last section underneath the very first section that you started with. If you look carefully at the image above, you can see how the middle section is being slipped between the sections to the left and right. Glue the final section in place.
IMG_3584
That’s it! Attach the star to a window with a small piece of transparent tape. This is my star in the window at sunset. And in case you were wondering, kite paper does fade over time. This star has been hanging in my very sunny Colorado window for over a year. I like the transformation.
This project originally appeared in my book Playing With Paper. There are numerous variations on how to fold and assemble these stars. Do a search for window stars to see the array of possibilities. There are even entire books dedicated to window star patterns. Try using regular kitchen waxed paper or other papers – and let me know what you discover.
——————————————————————————————————————–
About the 25 Days of Paper 2015: It’s a great time to celebrate paper, and I’m delighted to share my ideas for using this amazing material with you. Throughout December, I’ll be posting a paper tutorial on even days, and every odd day will bring news about paper artists, stores, distributors and more! Receive updates via e-mail by adding your address in the upper right hand corner of this page. Enjoy the season, and feel free to leave a comment below and check out what people are making in the 25 Days of Paper FB Group!

5 Comments

  1. Gail Looper says:

    Hi Helen,
    Somehow I missed the 1st project, which I think was a gift tag.
    Is there someway I can get those instructions.
    Thanks so much,
    Gail Looper

    • Helen says:

      Gail, there are only projects on even days (December 2, 4, 6, etc.) so you did not miss one! This is the first :). Also, they are not being featured in any particular order – so you’ll be surprised with each one :).

  2. […] translucent kite paper. You can find written instructions (and where to get the colored wax paper) in this blog post and/or watch my video tutorial.Papery […]

  3. […] This Window Star features kite paper, a colored wax paper: […]

  4. Linda says:

    VERY NICE!

Leave a Reply

Your email address will not be published. Required fields are marked *